How To Loosen Pool Cover Winch ( Step By Step Guide In 2023

Losing the Pool cover winch is usually a quick and easy process that can be completed with the help of a few simple tools .

Here are all the necessary steps which you can carry to loosen your pool cover winch:

  1. Open the cover by depressing the plunger handle on top of the cover.
  2. Pry off the cover screws with a screwdriver.
  3. Loosen the rod by turning it counterclockwise with a wrench.
  4. Remove the cover by pulling it free of the rod.
  5. Replace the cover screws and rod.
  6. Reinstall the cover by depressing the plunger handle and screwing it in place.

Complete Guide For How To Lossen Pool Cover Winch:

1. What Is A Pool Cover Winch?

A Pool Cover Winch is a device that helps to remove or secure a pool cover. It is typically used when the pool is not used and can be plugged into an outlet.

The cover can then be latched onto the winch using the provided strap and pulled off the pool.

This is a handy device to have if you need to remove or secure a cover regularly.

It can be stored in a convenient location and is typically lightweight enough that you can carry it around with you.

If you have a pool cover that needs to be removed or secured regularly, consider investing in a Pool Cover Winch. It will make the job a lot easier!

2. How Do You Use A Winch On A Pool Cover

source: pool cover center
  1. Remove cover from the pool
  2. Plugin winch
  3. Latch cover to winch using the strap provided
  4. Pull the cover off the pool
  5. Repeat steps

These Are five steps that are involved in carrying out the whole process.

First of all, you need to remove the cover from the pool. This can be done by using various available tools in the market.

Next, you will need to plug in the winch and make sure it is working correctly.

Latch the cover to the winch using the strap and then pull it off the pool. Repeat these steps until you get the cover off of the pool to enjoy your swimming.

Pool Cover Winch Instructions:

Pool cover winches are essential tools that you can have to help you with regular pool cover removal and installation.

They are lightweight and easy to use, so following these simple instructions to get started is all you need to do.

  1. Locate the winch near the pool. It will usually be in a nearby shed or garage, or you can purchase it from your local pool supply store.
  2. Plug in the winch and make sure it is working correctly.
  3. Make sure the cover is securely attached to the winch using the strap. The cover should be pulled tight not to move while the winch operates.
  4. Lie down on your back with your feet hanging over the side of the pool. Hold onto the strap and pull the cover off of the pool.
  5. Repeat these steps until the cover is off of the pool.

1. Pool Cover Winch Tips:

  1. Make sure the cover is securely attached to the winch using the strap. The cover should be pulled tight not to move while the winch operates.
  2. To keep the cover from being damaged, be sure to use the correct size strap. The winch should handle a weight of up to 225 pounds.
  3. Be sure to read the instructions for the winch before using it.
  4. Always use caution when using a winch, and be sure to take safety precautions, such as wearing protective gear.
  5. If there is snow on the ground, be sure to clear the area around the pool before using the winch. This will help avoid any accidents.

2. Installation Of Pool Cover Winch:

To use a Pool Cover Winch, you must adjust it accordingly and install it correctly.

First of all, you have to attach the strap. You can do this by threading it through the eye of the winch and then pulling it tight.

Next, you need to position the cover over the pool. Make sure that it’s positioned so that the straps hang over the edge of the pool.

Then, pull on the straps to tighten them. You can then release the tension on the strap and set the cover in place.

Finally, you need to connect the winch to the power source. This can be done by connecting the lead to an electrical socket and then plugging it into the wall.

You can then turn on the power by pressing the button on the winch.

Now that the Pool Cover Winch is installed, you can use it to lift the cover off, and you can have complete control over losing the cover by tightening it up.

3. Securing Pool With Help of Cover and Winch:

source: qingdago taimi

It is essential to cover your pool when you have to abandon it for a brief time; it may be because you are moving out or the winter season.

Whatever the reason it is, the best thing is to make it safe to use again right after winters or when you return home.

And this is only possible if you have secured your swimming pool from dirt and debris.

There are two most common ways to do this: a pool cover and a winch.

With the help of a pool cover, you can easily lift the cover off of your pool- even if it’s been secured with straps and ties.

And with a winch, you can quickly tighten the straps and ties so that the cover stays in place.

Preparing Pool For Winters:

Before you can secure your pool with a cover and winch, you’ll need to take some preliminary steps.

  1. First, clear away any debris from around the pool. This will help reduce the chances of the cover becoming caught on anything.
  2. Next, make sure the pool is clean and free of algae or moss. This will help ensure that the cover slides easily off the pool when you remove it.
  3. When you’re ready to secure the cover with the winch, attach the cord to one of the pool’s support posts. Then, use the winch to tighten the straps around the pool cover.
  4. Secure the pool with the cover using straps and ties. Ensure that the cords are tight- but not too tight- to prevent damage to the pool or cover.
  5. Finally, lift the cover off of the pool and enjoy your winter pool.

Conclusion:

You can easily loosen the pool cover winch to remove it or tighten the straps if necessary.

This is a great way to prepare your pool for use by ensuring that the cover stays in place and is easy to lift off the pool.

Moreover, the best part of the covered pool is that it will be ready to use right after the winter season is over, or you are back to spend some time swimming.