How To Use Badland Winch Without Remote – Badland Remote Bypass 2023

Badland Winches mostly come with a remote control which makes them easy to use and control from a safe distance. But this doesn’t mean you cannot use it without a remote.

How to use badland winch without remote with help from the hot wiring process, which is quite tricky but possible.

Moreover, in the case of remote-controlled badland winches, they can be operated remotely with the help of a lever.

First, connect the hook with the d-shackle tip facing upward and then engage the lever.

This will stop the Winch From Spooling freely, and you will be able to control it without a remote.

How Do You Use A Winch Manually?

You can easily use a winch manually, and the best way is to hotwire a winch.

This is a bit more difficult, but it can be done if you have the right tools and know-how. Hotwiring a will allow you to operate it Winch Without A Remote, but it’s not always easy.

You’ll need to have some knowledge about electrical wiring and follow directions carefully.

Check out our how-to hotwire winch guide if you’re up for the challenge.

Hotwiring Process:

Here Are complete steps to Hotwire a winch to use it manually:

1. Disconnect the battery from the winch.
2. Connect a 12-volt battery to the winch in the reverse direction of disconnecting it. Ensure the red/positive lead is connected to the winch and the black/negative lead is connected to the battery.
3. Reconnect the battery, making sure it’s in reverse.
4. Turn on the ignition and wait until the red/positive light turns off.
5. Disconnect the negative lead from the battery, then reconnect it to a grounded object ( like a metal post).
6. Turn off the ignition, then disconnect the positive lead from the battery.

Winch Controller:

Winch controllers are also used to operate winches remotely.

If you’re looking to use a winch manually, you’ll need to find a controller that your car’s battery can power.

There are a few different types of controllers available, so it’s essential to choose the best suits your needs.

Winch Controller Types:

1. Hook & Loop Controller:

This type of controller is the simplest to use.

It consists of a hook that loops over a pulley and a button that you press to start turning the winch.

2. Remote Control:

This type of controller is usually attached to a wall or post, and you use it to control the direction and speed of the winch.

3. Smartphone App:

If you’re looking for a more advanced option, you can use a smartphone app to control the direction and speed of the winch.

4. How To Wire A Winch Controller:

1. Decide which type of controller you’re using: hook & loop controller, remote control, or smartphone app.
2. Connect the controller to your car’s electrical system.
3. Connect the winch to the controller.
4. connect the negative lead from the battery to the black terminal on the winch, and connect the positive lead to the yellow terminal on the winch.
5. Turn the controller on, and test the winch by spinning it around.
6. If you’re using a hook loop controller, connect the hook to the winch. If you’re using a remote control, connect the power cord to the controller and connect the other end of the power cord to the vehicle’s electrical system.
7. If you’re using a smartphone app, open the app and connect to your car’s Bluetooth connection.
8. Turn on the car, and test the winch by spinning it around.
9. If everything’s working correctly, close the app and enjoy your new winch

Winch Remote Alternatives:

People forget their winch remote at home, break it on the route, or any other reason why you don’t have a remote at you to control a winch.

Then, you can use one of these alternatives to save your day.

1. Use A Smartphone App:

Many smartphone apps allow you to control your winch without going near the vehicle.

Some of the most popular apps include Winch Control Pro from Blue Arc and Winch Control for Android from RA Products.

2. Use A Radio Control:

If you don’t have a smartphone app or radio controller, you can buy a standalone winch control unit.

These units typically include an input jack for a receiver, a dial to control the power and speed, and an output jack to send the winch’s signal to the vehicle.

3. Use A Manual Control:

If you don’t want to use any other options, you can always use manual control. This involves operating the winch with hand-held switches or buttons.

It can be a bit difficult to get the hang of, but it can be a fun way to save the day if you find yourself without your remote!

If you have a remote at home, you can use that to control the winch.

If you don’t have a remote or if the remote is broken, then one of the alternatives above may be a better solution for you.

Whichever option you choose, make sure to read the instructions that come with the unit before using it so that you don’t damage your vehicle or yourself!

Badland & Badland 2500 Winch Remote Bypass:

Whether you have a Badland 2500 winch or some other, the bypass process can help you to control your winch without a remote control.

It usually involves installing switches connected to the control box to control the winch using a wired connection.

Follow the below-mentioned steps to install switches on your control box.

• Remove the four screws holding the bottom of the control box, and separate the two pieces. You will see some wires inside the box.

• Find a place to mount some switches, such as the headlight housing, and drill a couple of holes if needed.

• Fix the switches at the selected position.

• Now, connect one side of the switch to the ground wire and the other side to the control box.

• Connect the first switch to the blue wire in the control box.

• Connect the second switch to the white wire in the control box.

• Now your switches are ready to use 

With this modification, you can use the switches to control the winch system without needing remote control.

Conclusion:

Due to any possible reason you find yourself without remote control, then don’t panic and try one of the other options.

Depending on what type of remote you need, one of the following will work best for you: a smartphone app, a standalone winch control unit, or manual control.

You can also hotwire your winch, but this is not recommended because it can cause some severe damage if not done correctly.

So take a good breath and start to find the best way to get out of this miserable situation.

Video Guide: