Cables that come along with winches are not the defined set of cables for plowing. A number of applications exist that need winch cables to be stronger than that recommended by BHMA or some similar authority.
Plowing is a task that can stand in the task list which needs stronger cables than the recommended strength.
Most of the time, People buy a weaker cable for their winches, yet they must occasionally pull heavy trailers and tow other things to use for fieldwork.
We found a lot of discussion on how to calculate the breakage strain on Winch Cables when pulling with different implements:
- Soil Types
- Even Terrain
Specifically, plowing winch cables need extra efficiency and smart work to stop them from breaking. One of the most common problems of Winch cable breaking when plowing is that people are using robes/cables which are not powerful enough for plowing.
People using cables for plowing are breaking because the tensile strength and plow pull are more than they can bear, making it difficult to get perfect coiling back on the drum.
Thus it creates more tension and regression in the cable, which makes it difficult to bear any more weight, and it breaks.
So there is always some little discrepancy in using rods/cables for plowing compared to other implement uses for the same job.
How To Get Rid Of Cable Breaking Issues While Plowing?
Plowing could be much faster and easier if a tractor were available with power take-off as an auxiliary output of its engine, which was put on the side or beside its body.
After splitting its belt system from the engine itself, With power take-off input, you can move hydraulic rams on one side only with ease and proper flexibility and convenience.
Especially with special extension cylinders and other powerful & flexible components like bucket tips, snow blade supports, or high lift attachments for larger farm equipment.
Such additional features allow us to push heavier machines more intelligently. Furthermore, our forces will be a lot more intelligent when driving our tractors in situations where these fields require extra strength to complete certain tasks.
There is always a solution, and for a person fed up with this type of situation, there are methods to overcome this misery.
Sometimes it’s a mechanical issue, and usually, it is because people use an inadequate strength level rope or cable.
One of the best solutions for cable breaking problems is to change the cable, which can withstand double the weight or have double capacity than your needs.
Plowing makes the robe rough, which tends to break, and if you are using a Roller Fairlead, the condition will be worse.
So it’s better to switch to aluminum hawse fairlead instead of roller fairlead. This will allow the tensile to break down within the wire and cut the pull force to a remarkable level by plowing at a constant force.
You can use two straps to help the hook tie with the ropes, and this has been proved to be a helpful string to stop them from breaking.
What Makes A Winch Keep Breaking When Plowing?
While you plow or otherwise, if you want to add a winch as an auxiliary component of your tractor, you should follow some very important factors while purchasing one for yourself.
If you don’t follow them properly, then your machine may tend to fail under heavy-duty work, leading to severe damage and money loss.
The list below summarizes all these aspects in detail, which can help you plow easily without any breaking cable:
- You must take care of quality & compatibility with your tractor ATV or any other vehicle before purchasing one. It should match all types of components & capacities, from electrical systems to gearbox systems, engines, etc. So that, there should be no conflicts at all in its working condition.
- A winch must be sized correctly according to your power unit so that it won’t overload it and make it wear out quickly. Ensure that it has the correct height so that it won’t cause trouble while mounting on a roof or ceiling.
- A winch should have a battery so that you can use it anywhere even if there is no electric source around and while plowing if it stops due to tensile and tension strength. So that it won’t let the cable break even in harsh plowing conditions like terrains or mud.
Winch cable will keep breaking if you don’t follow the rules of dividing the tensile strength and pull force on different parts of the winch/ rather than putting all the effect on the cable, try to divide it using several other optional features.
To use a winch for high-speed performance, always buy a specialized heavy-duty model from a trusted company only. Use a specific capacity cable that can bear double your required power for plowing. Or any other work you want to conduct with your winch.
Hey, It’s George here! I have been working with heavy-duty machines for 10 years now. I started this blog to help others and let them know better about the different heavy duty machines, how they work how we have been doing over the years. I am hopeful you will find this blog helpful for you and get the best recommendations according to my experience.